NAS 2 Bay PANAM
Part Number: 100710042
Folded Size: 120mm W x 150mm H
Trim Size: mm 600W X 150mm H
Colors: 2C/2C
NAS Blue
K
B
u
o
O
s
r
V
i
a
n
g
E
e
s
e
s
S
t
C
R
2 Bay PANAM
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Any changes or modifications made to this
equipment may void the user’s authority to operate
this equipment.
EN
WWW.SEAGATE.COM
Visit us at our Support pages for assistance with:
1. Unpack the box.
2. Connect the Seagate NAS.
a. Connect the Ethernet cable from the Seagate NAS to your router.
b. Connect the power adapter from the Seagate NAS to a power outlet.
EN
• Installation: Additional instructions and
troubleshooting assistance
• Warranty Information
b
To contact support, visit us at our Contact Us page.
3
1
2
NOTE: To protect your data, always follow the safe
removal procedures for your operating system
when disconnecting your product.
NOTE: Do not connect the Seagate NAS directly to your computer;
connect the computer through a router to the Seagate NAS.
FR
WWW.SEAGATE.COM
Consultez les pages de support technique de notre
site pour toute question relative aux points suivants :
FCC DECLARATION OF CONFORMANCE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
3. Press the power button on the Seagate NAS. Wait for the LEDs on the front
panel to stop blinking. This may take a couple of minutes.
4. Insert the DVD. Follow the on-screen instructions to complete the setup.
• Installation : Instructions supplémentaires et
assistance dépannage
• Informations sur la garantie
Pour contacter le support technique, consultez la
page Nous contacter.
REMARQUE : Pour protéger vos données,
suivez toujours les procédures de retrait sécurisé
correspondant à votre système d’exploitation lors
de la déconnexion du produit.
FR 1. Déballez le produit.
CLASS B
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in residential installation. This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance
with the instructions, may cause harmful interference
to radio communications.
2. Connectez le serveur NAS Seagate.
a. Connectez le câble Ethernet du serveur NAS Seagate à votre routeur.
b. Branchez le cordon d’alimentation du serveur NAS Seagate sur une
prise de courant.
ES
WWW.SEAGATE.COM
Consulte nuestras páginas de asistencia técnica para
recibir ayuda sobre:
a
REMARQUE : Ne connectez pas le serveur NAS Seagate directement à
votre ordinateur. Utilisez votre routeur comme intermédiaire entre votre
ordinateur et le serveur NAS.
• Instalación: Instrucciones adicionales y asistencia
para la resolución de problemas
• Información de garantías
Para ponerse en contacto con el servicio de asistencia
técnica, consulte nuestra página Contacto.
NOTA: Para proteger sus datos, asegúrese de
seguir los procedimientos de extracción segura
de su sistema operativo siempre que desconecte
el producto.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
3. Appuyez sur le bouton de marche/arrêt du serveur NAS Seagate. Attendez
que les voyants du panneau avant cessent de clignoter. Cela peut prendre
quelques minutes.
4. Insérez le DVD. Suivez les instructions à l’écran pour terminer l’installation.
4
1. Desembale la caja.
ES
2. Conecte Seagate NAS.
100710042
a. Conecte el cable Ethernet desde Seagate NAS al enrutador.
b. Conecte el adaptador de corriente desde Seagate NAS a un
tomacorriente.
© 2012 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, and the Wave logo are
trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United
States and/or other countries. All other trademarks or registered trademarks are the property of their respective
owners. When referring to hard drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB,
equals one thousand billion bytes. Your computer’s operating system may use a different standard of measurement
and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions and
will not be available for data storage. The export or re-export of hardware or software containing encryption may
be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit
B
u
s
i
n
NOTA: No conecte Seagate NAS directamente a la computadora;
conecte la computadora a Seagate NAS mediante un enrutador.
e
s
S
s
t
o
2
-
r
a
B
A
Y
N
g
A
S
e
Q
U
IC
K
S
T
A
R
T
G
U
ID
E
3. Presione el botón de encendido de Seagate NAS. Espere que los
indicadores LED en el panel frontal terminen de parpadear. Esto puede
demorar algunos minutos.
4. Inserte el DVD. Siga las instrucciones en pantalla para completar la
configuración.
Seagate Technology LLC
10200 S. De Anza Blvd.
Cupertino, CA 95014
U.S.A.
PN: 100710042 06/12
|