M3T-F160-100NRB
Converter Board for Connecting FLX160 to 100-pin 0.65-mm-pitch QFP
User’s Manual
* NQPACK, YQPACK, YQSOCKET, YQ-GUIDE, HQPACK, TQPACK and TQSOCKET are trademarks of Tokyo Eletech Corporation.
Keep safety first in your circuit designs!
ꢀRenesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products
better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to
personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with
appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention
against any malfunction or mishap.
Notes regarding these materials
ꢀThese materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited
to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to
Renesas Technology Corporation, Renesas Solutions Corporation or a third party.
ꢀRenesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of
any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application
examples contained in these materials.
ꢀAll information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information
on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and
Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that
customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product
distributor for the latest product information before purchasing a product listed herein. The information described here may contain
technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no
responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information
published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home
page (http://www.renesas.com).
ꢀWhen using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and
algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the
information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any
damage, liability or other loss resulting from the information contained herein.
ꢀRenesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under
circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions
Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any
specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.
ꢀThe prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or
reproduce in whole or in part these materials.
ꢀIf these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from
the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport
contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.
ꢀPlease contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the
products contained therein.
Precautions to be taken when using this product
ꢀThis product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your
program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing
integration test, evaluation, or some experiment else.
ꢀIn no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.
ꢀRenesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.
However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any
circumstances.
ꢀThis product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not
fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when
used in Japan.
If the requirements shown in the "CAUTION" sentences are ignored,
the equipment may cause personal injury or damage to the products.
CAUTION
Rev.1.00
Dec. 01, 2005
(1/4)
REJ10J1194-0100
5. Connection Procedure (See Figure 3)
The procedure for connecting the M3T-F160-100NRB is
shown below.
FLX160-PRB,
M3xxxxTx-EPB
or
(1) Mount the NQPACK100RB on the user system.
(2) Attach the YQPACK100RB on the NQPACK100RB.
(3) Secure the four corners of the YQPACK100RB with the
YQ-GUIDE's.
M3xxxxTx-CPE
(5)
● Do not use the screws included with the
YQPACK100RB for fixing the YQPACK100RB.
● Do NOT use the screwdriver included with the
NQPACK100RB for fixing the YQ-GUIDE's. That is
used only for the HQPACK100RB168 or
HQPACK100RB1622.
M3T-F160-100NRB
(4)
Use a slotted screwdriver.
YQ-GUIDE -1
(3)
(4) Attach the probe of the emulation pod to the M3T-
F160-100NRB.
YQPACK100RB
(5) Connect M3T-F160-100NRB to the emulator probe.
(2)
(1)
NQPACK100RB
100-pin 0.65-mm-pitch
(PRQP0100JB-A,
formerly 100P6S-A) foot pattern
●: No.1 pin
Be sure to align the pins.
Figure 3 Connection procedure of the M3T-F160-100NRB
6. External Dimensions and a Sample Foot Pattern
55.0
21.8
80
51
0.35
81
50
31
100
●1
IC1
30
M3T-F160-100NRB REV.A
MADE IN JAPAN
0.65
13.8
17.2
Unit: mm
Figure 4 External dimensions and a sample foot pattern of the M3T-F160-100NRB
(3/4)
7. Precautions
CAUTION
Caution to Be Taken for This Product:
ꢀWhen connecting the YQPACK100RB, be sure to use the included YQ-GUIDE's.
ꢀDo NOT use the screws included with the YQPACK100RB for connecting the YQPACK100RB.
ꢀFor onboard evaluation, use the applicable HQPACK for your package as follows:
- PRQP0100JB-A (formerly 100P6S-A) package: HQPACK100RB168
- PLQP0100JA-A (formerly 100P6A-A) package: HQPACK100RB1622
IMPORTANT
Notes on This Product:
ꢀWe cannot accept any request for repair.
ꢀFor purchasing the NQPACK100RB, YQPACK100RB, HQPACK100RB168 and HQPACK100RB1622, contact
the following:
Daimaru Kogyo Ltd.
Tokyo Eletech Corporation
ꢀFor inquiries about the product or the contents of this manual, contact your local distributor.
8. Correspondence of Connectors CN1 and CN2
Table 2 Correspondence of the connectors
CN1
IC1
NC
10
CN1
IC1
11
9
NC
NC
NC
NC
6
4
2
NC
100
98
CN2
IC1
NC
13
15
17
19
21
23
25
27
29
NC
31
32
33
35
37
CN2
IC1
12
14,64
16
18
20
22
24
26
28
NC
30
16
14,64
34
36
CN1-01a
CN1-02a
CN1-03a
CN1-04a
CN1-05a
CN1-06a
CN1-07a
CN1-08a
CN1-09a
CN1-10a
CN1-11a
CN1-12a
CN1-13a
CN1-14a
CN1-15a
CN1-16a
CN1-17a
CN1-18a
CN1-19a
CN1-20a
CN1-21a
CN1-22a
CN1-23a
CN1-24a
CN1-25a
CN1-26a
CN1-27a
CN1-28a
CN1-29a
CN1-30a
CN1-31a
CN1-32a
CN1-33a
CN1-34a
CN1-35a
CN1-36a
CN1-37a
CN1-38a
CN1-39a
CN1-40a
CN1-01b
CN1-02b
CN1-03b
CN1-04b
CN1-05b
CN1-06b
CN1-07b
CN1-08b
CN1-09b
CN1-10b
CN1-11b
CN1-12b
CN1-13b
CN1-14b
CN1-15b
CN1-16b
CN1-17b
CN1-18b
CN1-19b
CN1-20b
CN1-21b
CN1-22b
CN1-23b
CN1-24b
CN1-25b
CN1-26b
CN1-27b
CN1-28b
CN1-29b
CN1-30b
CN1-31b
CN1-32b
CN1-33b
CN1-34b
CN1-35b
CN1-36b
CN1-37b
CN1-38b
CN1-39b
CN1-40b
CN2-01a
CN2-02a
CN2-03a
CN2-04a
CN2-05a
CN2-06a
CN2-07a
CN2-08a
CN2-09a
CN2-10a
CN2-11a
CN2-12a
CN2-13a
CN2-14a
CN2-15a
CN2-16a
CN2-17a
CN2-18a
CN2-19a
CN2-20a
CN2-21a
CN2-22a
CN2-23a
CN2-24a
CN2-25a
CN2-26a
CN2-27a
CN2-28a
CN2-29a
CN2-30a
CN2-31a
CN2-32a
CN2-33a
CN2-34a
CN2-35a
CN2-36a
CN2-37a
CN2-38a
CN2-39a
CN2-40a
CN2-01b
CN2-02b
CN2-03b
CN2-04b
CN2-05b
CN2-06b
CN2-07b
CN2-08b
CN2-09b
CN2-10b
CN2-11b
CN2-12b
CN2-13b
CN2-14b
CN2-15b
CN2-16b
CN2-17b
CN2-18b
CN2-19b
CN2-20b
CN2-21b
CN2-22b
CN2-23b
CN2-24b
CN2-25b
CN2-26b
CN2-27b
CN2-28b
CN2-29b
CN2-30b
CN2-31b
CN2-32b
CN2-33b
CN2-34b
CN2-35b
CN2-36b
CN2-37b
CN2-38b
CN2-39b
CN2-40b
8
NC
NC
NC
7
5
3
1
NC
99
97
95
93
91
89
NC
NC
NC
NC
NC
NC
87
96
94
92
90
38
62
NC
NC
39
NC
NC
40
NC
42
14,64
16
NC
44
46
NC
47
49
NC
51
52
53
55
57
59
61
NC
NC
NC
14,64
NC
NC
NC
NC
88
41
NC
NC
NC
NC
43
86
85
NC
NC
NC
83
81
NC
79
77
75
73
71
NC
NC
84
82
80
NC
78
76
74
72
70
68
66
14,64
62
45
NC
NC
48
50
NC
16
14,64
54
56
58
60
69
67
65
63
NC
NC
NC
NC
(NC: No connection)
(4/4)
|