RCA DVD Player DRC300i User Guide

Press REPEAT DISC button to select a  
repeat playback mode (a single repeat or  
all songs repeat). Press again repeatedly  
to cancel this repeat playback.  
5. Press RETURN button to end the photo  
viewing and go back to the previous  
menu.  
Zooming into an image  
PLAYING A DISC  
PRoGRAmmAbLE mEmoRY  
CUSTomIZING THE FUNCTIoN SETTINGS  
While a disc is playing, press the ZOOM button to enlarge the image in several levels.  
While an image is zoomed, you can use the  
and display the part you want.  
To return to normal view, press the ZOOM button until the “ZOOM: OFF” shows. The screen  
will return to normal.  
When you reach the edge of the image, the display will not shift anymore in that direction.  
,
,
or CURSOR button to shift the view  
The two types of programmed playback provided by this unit are title/chapter programmed  
playback and track programmed playback.  
This user manual explains the basic  
accompanying the specific DVD in question  
for more information about the options  
available on that DVD.  
Note :  
There are four options in the main setup  
menu: System Setup, Language Setup, Audio  
Setup and Video Setup.  
LANGUAGE SETUP  
1. Press the SETUP button in DVD mode.  
2. Use button to select Language Setup.  
instructions for operating this unit. Some  
DVDs are produced in a manner that allows  
specific or limited operation during playback.  
Therefore, this unit may not respond to all  
4. Press the RETURN button to go back to  
Make sure video  
out is activated in  
the setting of iPod  
Classic or iPod  
Nano.  
the previous menu.  
Title / Chapter programmed playback  
1. Press the MEMORY button.  
may appear on the screen during  
operation. Itmeansthatthedesiredoperation  
is not permitted by the unit or disc.  
In DVD mode, press SETUP to bring up the  
main menu. Select one of the menu icons  
across the top of the screen using the or  
buttons. The menu’s options are displayed on  
Playing Photos  
1. In iPod Home menu, use the  
operating commands. THIS IS NOT  
A
2. Enter the title numbers in  
highlight to chapter and enter the chapter numbers in  
3. Use or button to move to the other field.  
4. Repeat steps 2 to 3.  
. Use button to move the  
/
button  
Display Function  
OSD LANGUAGE  
AUDIO LANG  
DEFECT. Please refer to the instructions  
.
to select Photos and press the OK button.  
“Navigate your iPod Photo Library directly  
from your iPod” will appear on the screen.  
While the disc is playing, press the DISPLAY button on the remote control repeatedly to display  
,
,
Playing Videos  
1. In iPod Home menu, use the  
information on operation status.  
SUBTITLE LANG  
MENU LANG  
the left side of the screen. Press the  
,
,
/
button  
or buttons to move to the option’s choices  
on the right. Then press OK to select. Press  
SETUP or RETURN if you want to exit.  
5. Press the  
playback.  
PLAY button to start the programmed  
Playing a Disc  
1. Press the STANDBY / ON button to turn on  
the unit.  
See CUSTOMIZING THE FUNCTION  
SETTINGS before proceeding to step 2.  
2. Press the OPEN/CLOSE button to open  
the disc tray.  
3. Place a disc onto the disc tray with the  
label side up.  
4. Press the OPEN/CLOSE button to close  
the disc tray. It takes a short while for your  
unit to load the disc. After loading, for most  
DVDs, the unit will automatically take you  
main menu or start playing.  
5. If the unit does not automatically start  
playing the DVD, press the  
button.  
Audio Selection  
to select Videos and press the OK button.  
2. Use the button to select from Movies,  
e.g.  
On some DVDs, the sound is recorded in two  
or more formats. Follow the directions below  
to select the preferred language and sound  
system.  
/
Elapsed Time:  
Elapsed time from the beginning of the  
chapter/title which is currently playing.  
Home  
Note: If you press the STOP button twice, the programmed  
selection will be cleared.  
Music Videos, TV Shows, Video Podcasts  
or Rentals, press the OK button to enter.  
(“Navigate your iPod Video Library directly  
from your iPod” will appear on the screen if  
your are using an iPod touch.)  
Docking System for iPod  
Welcom  
3. Use  
,
,
or  
button to select a  
Music  
Photos  
language, then press the OK button.  
The screen will change to your selected  
language immediately.  
3. To exit the SETUP MENU and return to  
the normal screen, press the RETURN or  
SETUP button.  
SYSTEM SETUP  
1. Press the SETUP button in DVD mode.  
2. Select System Setup in the main menu  
1. While a disc is playing, press the AUDIO  
button to show the current audio format  
number. e.g.  
Track programmed playback  
1. Press the MEMORY button.  
2. Enter the track numbers in  
Chapter Remaining time  
Remaining Time:  
Remaining time of the chapter/title which is  
currently playing.  
Videos  
Settings  
3. Use the  
/
button to navigate the iPod  
C
00:12:03  
-
.
using the  
,
,
or buttons.  
menu lists and select a video, press the  
OK button to begin playback. (You may  
also use the control wheel and keys on  
your iPod to operate it.)  
3. Use or button to other field.  
,
,
Title Elapsed time  
4. Repeat steps 2 to 3.  
5. Press the PLAY button to start the programmed playback.  
2. Use the  
/
button to navigate the iPod  
00:30:15  
Total time  
02:01:22  
T
Notes:  
2. Press the AUDIO button repeatedly to  
select the desired audio format.  
Notes:  
menu lists and select a photo, press the  
OK button to begin playback. (You may  
also use the control wheel and keys on  
your iPod to operate it.)  
HD OUTPUT  
VIDEO  
TV TYPE  
DEFAULT  
Some DVDs may not play in the audio  
language selected. A prior language may  
be programmed on the disc.  
Some DVDs may be set to display subtitles  
in a language other than the one you  
selected. A prior subtitle language may be  
programmed on the disc.  
PLAYING PICTURE FILE DISC  
Home  
T
-
If only one audio format is recorded on the  
DVD, the number does not change.  
Some DVDs allow you to change audio  
selections only via the disc menu. If this  
is the case, press the MENU button and  
choose the appropriate language on the  
disc menu.  
Docking System for iPod  
Welcom  
PLAY  
Press the PAUSE button to pause, press  
This unit can play picture files recorded on  
CD-R and CD-RW discs.  
Music  
Photos  
the  
Press the  
previous / next photo.  
PLAY button to resume .  
LoCATING A DESIRED SECTIoN  
/
button to skip to the  
3. Select a menu option using the  
or  
Videos  
Settings  
Pausing Playback (Still Mode)  
Press the PAUSE button on the remote. To  
resume normal playback, press the  
button.  
Each time you press the PAUSE button, the  
picture advances one frame.  
buttons and press OK button.  
Playing a Picture File Disc  
1. Open the disc door.  
2. Place a picture file disc onto the tray with  
label side up.  
3. Close the disc door.  
4. The unit will load the disc and automatically  
display the contents of the disc on the  
screen, while playing the beginning of the  
first picture file. These files will then be  
played back one by one.  
5. Press or button to select a picture file  
to view.  
Some DVDs allow you to change subtitle  
selections only via the disc menu. If this  
is the case, press the MENU button and  
choose the appropriate subtitle language  
from the selection on the disc menu.  
Some DVDs may not include your pre-  
selected language. In this case, the DVD  
player automatically displays disc menus  
consistent with the disc’s initial language  
setting.  
3. Press the RETURN button to go back to  
Locating a specific chapter / track  
Locating a specific time  
You can move to specific location by  
entering its corresponding time (hours,  
minutes, seconds)  
the previous menu.  
PLAY  
HD OUTPUT  
If you know the chapter / track number you  
want to play, you can locate a specifc chapter  
/ track by directly selecting a chapter / track  
number.  
a
You can select different audio channels  
(Stereo, Mono L, Mono R or Mix Mono)  
on an Audio CD by pressing the AUDIO  
button repeatedly.  
This lets you select the resolution output  
according to the connected TV. The  
Composite Video Out (YELLOW jack) will be  
kept in standard resolution for all HD OUTPUT  
settings.  
Press the PAUSE button to pause, press  
Using a iPod Touch to view the photo  
the  
Press the  
previous / next movie.  
Press the  
PLAY button to resume.  
1. In iPod Home menu, use the  
/
button  
1. Press the GOTO button.  
/
button to skip to the  
to select Photos and press the OK button.  
“Navigate your iPod Photo Library directly  
from your iPod” will appear on the screen.  
2. Touch the “Photos” selection on iPod panel,  
and then select the photo your prefer.  
1. Press the GOTO button to search your  
desired chapter / track.  
2. Press or button to highlight a chapter /  
track and press the corresponding number  
button(s) for the chapter you want.  
2. Press or button to highlight time.  
3. Press the corresponding number buttons  
for the setting point you want.  
4. Press the OK button to confirm. The unit  
will start playback about 3 seconds later.  
Folders  
Files within the  
current folder  
Stopping Playback  
/
button to begin fast  
Subtitle Selection  
1. While DVD is playing, press the  
Press the  
STOP button at the location  
reverse/forward, press the  
to resume normal playback.  
PLAY button  
NOTE:  
a
Supported HD JPEG mode: 480p, 720p,  
1080I and 1080p.  
where you want to interrupt playback. To  
resume playback at the position where  
the disc was stopped, press the  
button.  
You can press the  
interrupt playback, and press the PLAY  
button to resume playback.  
You can use the GOTO function or use the  
numbered buttons to enter the number of a  
picture file to quickly select the image.  
Press the ANGLE button on the remote control  
to rotate the picture orientation by 90°.  
PAUSE button to  
SUBTITLE button to display the current  
language setting, as shown in the  
example.  
4. Press the RETURN button to go back to  
the previous menu.  
3. Touch the “  
” to confirm the photo.  
3. Press the OK button to confirm. The unit  
will start playback about 3 seconds later.  
PLAY  
AUDIO SETUP  
4. Touch the “ Yes ” to activate iPod’s video  
output. The photo will appear on the  
screen.  
VIDEO  
6. Press the  
,
,
or CURSOR button  
1. Press the SETUP button in DVD mode.  
2. Select Audio Setup in the main menu using  
the or buttons.  
Only available when HD OUTPUT is 480p.  
If you press the STOP button twice, the  
to view and select the files that you want to  
view, then press the OK button to confirm  
the selected file.  
Note : Make sure TV Out in iPod is set to ON  
when you are playing the video.  
Notes :  
unit’s memory will be cleared and pressing  
2. Press the SUBTITLE button repeatedly to  
select the desired subtitle language.  
Notes:  
INTERLACE-YUV :  
Some discs may not respond to this  
process.  
Some scenes may not be located as  
precisely as you specified.  
This method for accessing specific  
locations is available only within the current  
title of the DVD disc.  
the  
PLAY button will reset the disc to  
Step 2  
Select if you are connecting the player  
with Component Video outputs to a non-  
Progressive Scan TV.  
the beginning.  
Settings  
1. In iPod Home menu, use the  
Some DVDs are set to display subtitles  
automatically, and you cannot turn them  
off even if you set the subtitle function to  
off.  
/
button  
Fast Forward / Fast Reverse  
1. Press the SEARCH  
button when a disc is playing. Each time  
you press the SEARCH  
button, the playback speed changes in  
the following sequence:  
Locating a specific title  
to select Settings and press the OK  
button.  
AUDIO OUT  
P-SCANYPBPR :  
iPod FEATURES  
or SEARCH  
If a DVD disc contains title numbers, you can  
locate a specific title by directly selecting a  
title number.  
Select if you are connecting the player with  
Component Video outputs to a Progressive  
Scan TV.  
2. Use the  
/
button to select from Shuffle,  
iPod Dock Adapter  
Connecting your iPod  
or SEARCH  
During some scenes, the subtitles may not  
appear immediately after you select your  
desired scene.  
The number of subtitle languages recorded  
differs depending on the disc. If only one  
language is recorded, the language does  
not change.  
Repeat or Lanuage. Press the OK button  
to enter the settings.  
Before connecting your iPod, you need to  
install the appropriate iPod Dock Adapter  
(supplied with the iPod) in the dock of the  
unit.  
Warning: To prevent damage to the unit and/  
or your iPod, connect or remove your iPod  
when the unit is powered off or the unit is not  
in the iPod mode.  
1. In stop mode, press the GOTO button.  
2. Press or button to highlight a specific  
field and press the corresponding number  
button(s) for the title you want.  
3. Press the OK button to confirm. The unit  
will start playback about 3 seconds later.  
S-VIDEO :  
Select if you are connecting the player with  
3. Use the  
/
button to a setting, press the  
OK button to confirm.  
4. Press the RETURN button to go back to  
the previous menu.  
S-VIDEO output to a TV with S-VIDEO  
input.  
3. Select a menu option using the  
,
,
or  
PLAY  
FORWARD x2  
FORWARD x20  
FORWARD x4  
FORWARD x8  
Step 3  
Step 4  
buttons and press OK button.  
1. Ensure the appropriate iPod Dock adapter  
that was supplied with your iPod is  
installed.  
2. Insert your iPod into the connector in the  
dock.  
Installing the iPod Dock Adapter  
1. Push to open the iPod docking door.  
2. Place your iPod Dock Adapter into the  
dock until it sits firmly in place.  
TV TYPE  
This function can only be used for discs  
on which subtitles have been recorded in  
multiple languages.  
Some DVDs allow you to change subtitles  
only via the disc menu. If this is the case,  
press the MENU button and choose the  
appropriate subtitle on the disc menu.  
Depending on the format of the DVD, you can  
choose the picture format (aspect ratio) best  
suited to the format of your TV screen:  
or  
PLAY  
AUDIO OUT  
Home  
Docking System for iPod  
Select the output sound format corresponding  
to your system connection. When making  
connection to a TV or stereo system via the  
analog audio jacks, select PCM or RAW.  
BACKWARD x2  
BACKWARD x20  
BACKWARD x4  
Welcom  
Music  
Photos  
3. Press the SOURCE button to select the  
iPod mode. Your iPod will be connected  
automatically, and iPod Home menu  
appears.  
iPod Dock Adapter  
4:3 PS (Pan Scan)  
REPEAT PLAYbACK  
BACKWARD x8  
When wide-screen  
video is played, this  
mode clips the right  
and left sides of  
the image so that it  
can be viewed on a  
conventional screen.  
Some wide-screen  
DVDs that do not  
permit Pan Scan  
mode playback are  
automatically played  
in letterbox mode  
(black bands top and  
bottom).  
Videos  
Settings  
Cut off when  
screen video image is  
played.  
a
wide-  
2. Press the  
reach the desired point to resume normal  
playback.  
Notes:  
PLAY button when you  
You can play  
repeatedly. (Title repeat, chapter repeat, A-B  
repeat)  
a
specific title or chapter  
To resume normal playback  
3. Press the REPEAT DISC button until the  
RAW: Does not have a Dolby Digital Decode.  
PCM: Select when connected to a 2 channel  
digital stereo amplifier.  
REP:  
[ OFF ] indicator displays on the  
Angle Selection  
Home  
Shuffle : Select from Shuffle Off, Shuffle  
Songs and Shuffle Albums.  
Repeat : Select from Repeat Off, Repeat  
One and Repeat All.  
screen.  
5. Press RETURN button to end the photo  
viewing and go back to the previous  
menu.  
Docking System for iPod  
Welcom  
Some DVDs contain scenes which have been  
shot from a number of different angles. For  
these discs, the same scene can be viewed  
from each of these different angles.  
1. While you are playing a DVD with different  
angles recorded, press the ANGLE button  
to view the number of current angles  
available.  
Repeating a chapter  
The unit mutes sound and subtitles during  
reverse and forward scan of DVDs.  
The fast playback speed may differ  
depending on the disc.  
If apply HDMI connection to TV, make sure  
to select PCM, audio signal passing to TV  
via HDMI cable.  
You can play the same chapter repeatedly.  
1. Whilethediscisplaying, presstheREPEAT  
DISC button until the REP: [ CHAPTER ]  
indicator displays on the screen. The  
current chapter is played repeatedly.  
Music  
Photos  
You can play a specific section repeatedly.  
Removing the iPod Dock Adapter  
1. Remove the iPod Dock Adapter as  
shown.  
Repeating a specific section  
1. While the disc is playing, press the  
REPEAT A-B button at the beginning of  
the section (REPEAT A- is displayed) you  
want to play repeatedly.  
2. Press the REPEAT A-B button again at  
the end of the section ( REPEAT A-B is  
displayed).  
Videos  
Settings  
PAN SCAN  
Language : Select OSD language.  
Using a iPod Classic / iPod Nano to  
view the photo  
VIDEO SETUP  
2. Replace it with another one you need.  
Skipping to a Different Chapter/Title  
WARNING: Due to the i-Pod limitation, not  
all functions of some i-Pod models can be  
controlled via the remote control.  
1. In iPod Home menu, use the  
/
button  
1. Press the SETUP button in DVD mode.  
2. Select Video Setup in the main menu using  
the or buttons.  
Repeating a title  
Press the  
current or previous chapters/tracks.  
Press the  
chapters/tracks.  
For audio CDs, use the number buttons on  
the remote control to jump immediately to  
the desired track number.  
PREV button to go back to  
to select Photos and press the OK button.  
“Navigate your iPod Photo Library directly  
from your iPod” will appear on the screen.  
button to select “Photos”,  
and then press the OK button to confirm.  
You can play the same title repeatedly.  
2. While the disc is playing, press  
the REPEAT DISC button until the  
2. Press the ANGLE button repeatedly to  
change the scene to the next recorded  
angle. e.g.  
Note:  
NEXT button to advance  
Your iPod will be charged automatically  
(until fully charged) once it is connected,  
no matter whether the unit is in iPod mode  
or not.  
Please Navigate directly on your iPod  
OR  
2. Press the  
/
LETTER BOX  
REP:  
[ TITLE ] indicator displays on  
4:3 LB (Letter Box)  
When wide-screen  
video is played  
in this mode on  
the screen. The current title is played  
repeatedly.  
3. The unit will immediately begin replaying  
your selection.  
BRIGHTNESS  
CONTRAST  
HUE  
SATURATION  
SHARPNESS  
Press The [CLEAR] Key  
to go back to main menu  
3. Use the  
button to select a photo,  
press the OK button to begin playback.  
Make sure the software of iPod is the  
a
To resume normal playback  
3. While the disc is playing, press  
the REPEAT DISC button until the  
REP:  
screen.  
To resume normal playback  
latest.  
conventional screen,  
black bands appear  
at the top and bottom  
of the screen.  
4. While the disc is playing, press the  
REPEAT A-B button until the A-B CANCEL  
indicator displays on the screen.  
Slow-motion Play  
1. Press the SLOW button on the remote in  
play mode.  
Step 2  
Step 3  
IMPORTANT:  
Before docking your iPod. MAKE SURE your  
iPod has the latest FIRMWARE.  
Playing Music  
1. In iPod Home menu, use the  
If the above screen appears, you may need  
to control the iPod Library directly from your  
iPod.  
WIDE SCREEN  
/
button  
[ OFF ] indicator displays on the  
to select Music and press the OK button.  
2. Use the button to select from  
Playlists, Artists, Albums, Songs, Genres  
or Composers. Press the OK button to  
enter.  
Each time the SLOW button is pressed, the  
speed of slow-motion playback changes in  
the following sequence:  
/
Notes:  
16:9 (Wide screen)  
3. Select  
Saturation or Sharpness using the  
Brightness,  
Contrast,  
Hue,  
or  
You can play a single track and whole disc  
repeatedly.  
Some discs may not permit A-B repeat  
operation.  
This is the correct mode for playing wide-  
iPod is a trademark of Apple Computer, Inc.,  
registered in the U.S. and other countries.  
screen videos on a wide-screen.  
Notes :  
After approx. two seconds, playback will  
continue from the new angle you selected.  
If no button is pressed within 10 seconds,  
playback continues without changing the  
current angle.  
buttons, hightlight your selections and  
press OK button.  
A-B repeat can only be used within the  
same title. If the start and end of the  
section to be repeated are in different titles,  
A-B repeat is cancelled.  
SF 1/2  
SF 1/3  
PLAY  
SF 1/4  
SF 1/7  
SF 1/5  
SF 1/6  
Repeating a single track  
3. Use the  
/
button to navigate the iPod  
The displayable picture size is preset on the  
You can play the same track repeatedly.  
1. While the disc is playing, press  
the REPEAT DISC button until the  
4. Press OK button twice to activate photo  
menu lists and select songs, press the OK  
button to begin playback. (You may also  
use the control wheel and keys on your  
iPod to operate it.)  
DVD disc. Therefore the playback picture  
of some DVD discs may not conform to the  
picture size you select.  
When you play DVD discs recorded in the  
4:3 aspect ratio, the playback picture will  
always appears in the 4:3 aspect ratio  
regardless of the TV TYPE setting.  
showing to TV screen.  
You can specify a segment only within the  
current title or track.  
The A-B repeat function does not operate  
in scenes where different camera angles  
are recorded.  
Step 4  
2. Press the  
normal playback speed.  
PLAY button to return to  
REP:  
[ REP 1 ] indicator displays on  
the screen. The current track is played  
repeatedly.  
Notes:  
Press the PAUSE button to pause, press  
This function can only be used for discs  
the  
Press the  
previous / next song.  
Press the  
PLAY button to resume.  
on which scenes shot from multiple angles  
have been recorded.  
Repeating a whole disc  
2. While the disc is playing, press  
the REPEAT DISC button until the  
/
button to skip to the  
Specifications and external appearance are  
subject to change without notice.  
If only one angle is recorded, “  
: 1/1” is  
/
button to begin fast  
DEFAULT  
displayed.  
REP:  
[ REP ALL ] indicator displays  
reverse/forward, press the  
to resume normal playback.  
PLAY button  
It takes 3-5 seconds to reset the unit to the  
factory default.  
on the screen. The whole disc is played  
repeatedly.  
Printed in China  
811-300I91W011  
6
7
8
9
10  
 
DRC300i IB ENG REV1.indd  
1
7/14/2008 9:51:19 AM  

Quantum Audio Network Card Scalar 50 User Guide
QVS Surge Protector PP114C User Guide
Radio Shack Automobile Accessories 270 018 User Guide
Renesas Network Card M30870T EPB User Guide
Roland Camcorder Accessories tripod User Guide
Rosewill Network Card RNX G100 User Guide
Samson Music Mixer Servo 4060 User Guide
Scag Power Equipment Lawn Mower SMWC 52V User Guide
Scotsman Ice Ice Maker MAR1400 User Guide
Sears Snow Blower 536884821 User Guide